ATN Night Tiger, Руководство пользователя

Страница: 4 / 8

3 4
INFRA-RED ILLUMINATOR
Infra-red illuminators, or IR illuminators, are common to
night vision. The IR light greatly enhances the perform-
ance of the Night Tiger while remaining almost totally
invisible to the naked eye. The Night Tiger has two built-
in IR illuminators.
To turn the IR on, push the
IR button. It is important to
remember that the IR illuminator is simply an infra red
light source, and like any light source, it may loose its
effectiveness over a great distance.
NOTE:
The IR will automatically turn off when the unit’s
power is turned off.
450 MV INFRARED ILLUMINATOR
(optional)
The 450 mV IR Illuminator works on a separate battery from the main unit. To install the battery
unscrew cap and insert battery in the same derection as depicted by the diagram on the IR. To
install the 450mV IR Illuminator to the scope screw the thumb screw on the IR into the thread
on the scope.
The IR illuminator control buttons are located on its
side. To switch the Digital IR illuminator on/off press
“+” and “-” buttons simultaneously. When the IR illu-
minator is switched on you can see the green LED lit.
By pushing the buttons “
+
” and “
-
” you may adjust the
IR brightness.
The IR beam is focusable to change the field of
coverage. To change the beam width slightly turn
the IR lens.
You could change the IR control panel fitting your
needs. The screw-tool included into the set should
be used for weakening the fixing screw located on the IR. Rotate the IR placing at in the most
convenient position. Tighten the screw with the screw-tool to fix the new position.
2X DOUBLER
(optional)
Unscrew the front lens off the body of the Night Tiger (make sure that the unit is turned off).
Screw the doubler into the body of the Night Tiger where the front lens was removed. Screw
the 85 mm lens into the doubler.
NOTE: When attaching the doubler do not be afraid to use a little force.
Your Night Tiger
Optional
Doubler
Night Tiger
lens or any “C”
mount lens
Doubler
Battery
Housing
Fixation
Screw
IR Elevation
IR Windage
IR Focusing
IR Brightness
Adjustment
Built-in Infra-red
Illuminators