memory, reticle pattern memory and low
battery indication.
Since there are no movable parts the reli-
ability of the device is greater then stand-
ard reflex sights. MultiAim® combined with
superb optics, rugged construction, highly
accurate windage and elevation system
and an efficient electrical design for long
battery life makes the Digital Ultra Sight
the best reflex sight on the market.
Military Personnel, Law enforcement Pro-
fessionals, Hunters and Sport Marksmen
can enjoy the sight that surpasses the com-
petition in features and is priced far more
economically.
opERaTInG InSTRUcTIon
Insert battery
The battery (included) is a coin style 3v
lithium (model #2032).
Unscrew the battery cap that is located on
the rear side of the unit.
The battery goes in negative side first.
Turning the Digital Ultra Sight on
After the battery is inserted press Power
button to turn unit on. Adjust reticle pat-
tern with a push of the Digital Brightness
Control buttons to the desired brightness.
Hold the Ultra sight away from you and
look through it with both eyes open to see
a reticle pattern.
Reticle patterns
every Digital Ultra Sight comes with five
reticle patterns.
• Dot
• Post
• Post with Dot
• Open Cross Hair
• Cross Hair
You can choose your preferred pattern by
pushing the reticle Pattern Selector but-
ton.
MoUnTInG
The Digital Ultra Sight are designed to be
mounted on a standard 7/8 weaver rail.
Caution:
Be sure gun is not loaded.
Use safe gun handling procedures at all
times.
Slightly loosen horizontal fixation screws.
Place the scope on the dovetail mount,
making certain that the mount aligns with
the receptor attachment screw. re-tight-
en horizontal fixation screws.
wInDaGE anD ELEVaTIon
aDjUSTMEnTS
The vertical (elevation) and horizontal
(windage) adjustments for the Digital Ul-
tra Sight can be achieved by turning the
windage and elevation adjustment mech-
anisms. Each click equals 1/2 inch at 100
yards. When reaching the maximum of
the rotation do not use force.
MaInTaInInG
The Digital Ultra Sight are waterproof
and shock-proof. However, you should
never try to take apart or clean it internally
(it will void your warranty). If your scope
ever does need repairs or adjustments, it
should be returned to ATn's service de-
partment. The exposed optical surfaces
will perform their best if they are occa-
sionally wiped clean with a lens cloth or
with optical quality lens paper like those
for eyeglasses or camera lenses. Main-
tain the metal surfaces of you ultra sight
by removing any dirt or sand with a soft
brush so as to avoid scratching the finish.
Wipe down the scope with a damp cloth
and follow with a dry cloth. Finally, going
over the body with a silicon treated cloth
will restore luster and protect the scope
against corrosion, be careful not to touch
any of the lenses with the silicon cloth.
