INSTALLATION INFORMATION
© Copyright 2022 ATMOX INC
Issue: 2022-01
ATMOX INC
10612-D Providence Rd. #229, Charlotte, NC 28277
Phone: 704-248-2858
www.atmox.com
Tools needed for Installation:
•
Drill with screw bit to fit screws selected
•
Screws for mounting to joist (not included)
Installation Steps:
Locate U-Bracket and extension shaft
(pipe) with 4 locknuts.
Screw 1 locknut on each end of shaft.
Insert shaft into U-Bracket and attach by
tightening with lock nut.
Attach other end of shaft into opening in
fan bracket and tighten with lock nut.
.
1
2
3
4
2
3
4
6
The bracket is now ready to be mounted
directly to the joist in the crawlspace or
attic.
Use 2 or 4 screws to attach U-Bracket to
both sides of the joist through the 4
available openings. Make the bracket tight
to avoid fan vibration.
Fan is ready for power connection.
5
6
7
Optional Ducting:
•
For hard-to-ventilate areas, insulated or non-insulated 8” ducting can be attached to either one or
both ends of the Pipe Fan.
•
Attach ducting using multiple cable ties strapped together and tightened around fan grill.
