18
Maintenance
Before doing maintenance, please make sure that the power is cut,
the power cord is unplugged, and the machine itself has cooled down.
The maintenance must be done by qualified person.
1.
The fluid is not allowed to get dirty. Be sure to always clean or
eplace the caps on the tank (Replace the caps on the tank directly.
This kit includes quick connector, cap, pipe and filter) and tight the
cover of the
Haze
machine tank immediately after filling.
2.
Prolonged use, the nozzle may be clogging by impurities,
periodically use tools to clean the nozzles, keep the nozzle
unobstructed.
Other Abnormal Situations:
Heater
Overheat
No
Heating
No
Fluid
Flashing and showing this status, means heater is
too hot or thermos sensor is cut;
Flashing and showing this status, means unable
heating;
Flashing and showing this status, means fluid runs
out or pumping no fluid; at this moment, speed
of the fan will reduce to minimum, and pump will
stop working.
• If fluid is run out, full the tank with fluid and press “Manual”
to reset.
