21
Operation
4.7
Manual white balance
When using a TFT monitor: For preventing from misinterpretations the angles of vision
stated in the operating instructions of the monitor must be observed.
4.7.1 White balance using the example of a halogen lamp
The ATMOS® Cam 21 / 31 contains an automatic white balance, which allows you an
uncomplicated and time-saving examination with best possible light configuration.
However you can still perform a manual white balance. This manual adjustment will be
maintained with this light source for subsequent applications.
If you delete the manual white balance the automatic configured white balance will be
used.
Execute the white balance on a white sheet but not under fluorescent light. This will
affect the result. Dimming of all extraneous light sources and direct daylight irradiation.
To cancel the manual white balance press any button.
1.
2.
Initialization phase (all lights on)
3.
flashes
4.
4.7.2
Deleting the manual white balance using the example of a halogen
lamp
1.
2.
Press and keep pressed.
3.
meanwhile
4.
Wait until the
initialization phase
is completed (all
lights are off).
Release the light
source button.
Содержание Cam 21
Страница 1: ...2018 08 Index 09 GA1GB 150401 0 Operating Instructions ATMOS Cam 21 31 English ...
Страница 13: ...13 Setting up and starting up Roadster 1 2 3 4 5 insertion like application part q v Chapter 4 3 1 ...
Страница 20: ...20 Operation 4 6 LED light source option 1 2 3 click 4 ...
Страница 39: ...39 For your notes 13 0 For your notes ...