ATMIZONE Atmizoo VapeSnail, Руководство пользователя

Страница: 5 / 6

Vaping on the VapeSnail
Air Flow Tubes and Pins.
You can adjust your air flow by installing
any of the AFC Tubes with the help of the Tool.
Preinstalled Pos. Tube (D=4.0mm) can also
host the MTL Pins (4b). The Tubes not only
control air flow right under coil but also serve
as adjustable positive pole of the VapeSnail.
Normally you screw them in all the way, but
they can be adjusted lower if needed (4c.
You can change AFC Tube (and
consequently MTL Pin as well) any time, even
with full Tank and a build on the Deck. When
you do this, always grip the VapeSnail in one
hand to make sure that the Tank will not open
accidentally.
English 5
Wicking and the use of C & C Reducer.
Trim legs of cotton along the rims of the
deck (3a - black marking as minimum length).
Legs should be long enough to reach the wells
(3b), as this prevents the wick collapsing when
soaked with juice. Also the cotton should be
enough to ensure it will stand behind juice
slots (3c) and hold liquid intake at proper
levels. Don’t overdo, but also don’t be stingy.
The VapeSnail comes with the C & C
reducer pre-installed. This creates a restricted
chamber and a narrow Chimney suitable for
MTL builds. If you want to remove it, just insert
your coil core guide through the top part and
push down (4a).