ATMIZONE atmizoo tripod, Руководство пользователя

Страница: 5 / 10

Vaping on the Tripod
Air flow Pins and Ring.
You can regulate air flow in two ways.
1.pin the air flow pin of your choice inside its
Pos Post Tube nest or 2. adjust the AFC Ring
Add a bit of juice around the pin o-ring.
To insert the air flow pin, you need to unscrew
a few turns of both the Post Screws. This will
allow free space for the pin to pass through,
way in or out (3a).
Adjust the AFC Ring from zero to a fully
open D=4mm (3b).
Coiling! Fasten your coil down on the posts.
The two small, half circle cut outs on
the rims of the Deck are there for you to align
the coil properly. They also allow some extra
space if you need to lower your setup right
above the air hole.
Better orient the legs of the coil
downside. This will allow a. the cotton to cover
the legs and b. to position the coil closer to air
flow.
On to wicking. Use the desired cotton
quantity, trim and place cotton edges inside
the juice well. Amount of cotton depends on
your vaping profile.
English 5
AFC Ring has a stop point. This helps to
fully screw or unscrew Tripod on a 510 thread.