Atmel Wireless LAN Access Point, Руководство пользователя

Страница: 13 / 64

13
Step 3. Type the "
Access Point MAC Address " from the label on the bottom of the
Access Point, type the “ Config IP ” address from your system administrator,
and then click “ OK ”.
Step 4. Open a MS-DOS Prompt window and type ping followed by the IP address
used in the IP Config . The IP address is assigned to the Access Point . The
Access Point’s replies to the ping confirm that the IP address was assigned
correctly.
Step 5. If you get a ping reply, then the IP address has been temporarily set. In order
to set it permanently you need to run SNMP Manager without powering off
the Access Point.