Atmel SAMA5D3 Series-EK, Руководство пользователя

Страница: 52 / 119

6-4 SAMA5D3x-EK User Guide
11180A–ATARM–30-Jan-13
6.1.3 Devices
List of the MB board peripherals:
„ Two EMAC PHY
„ One audio CODEC
„ Two high speed MCI card interfaces
„ Two CAN transceivers
„ One RS232 port with level translator features USART1
„ One smart DAA port
„ Two USB host port
„ One USB host/device port
„ On-board power regulation
„ LCD/ISI extension interface
„ HDMI interface
„ ZigBee
®
interface
„ One-wire device
6.1.4 Board Interface Connection
„ Main power supply (J4)
„ 200 positions socket (as defined in SODIMM 200), 0.6mm pitch (J12)
„ USB A Host/Device, support USB host/device using a type micro AB connector (J20)
„ USB B Host, support USB host using a type A connector (J19, upper)
„ USB C Host, support USB host using a type A connector (J19, lower)
„ USB-to-serial bridge on DBGU, and JTAG-OB functionality (J14)
„ USART1 (RX, TX, RTS, CTS) connected to a 9-way male RS232 connector (J8)
„ JTAG, 20 pin IDC connector (J9)
„ MicroSD connector (J6)
„ SD/MMC connector (J7)
„ Gigabit Ethernet ETH0 (J17)
„ Ethernet ETH1 (J24)
„ Headphone (J15), line (J13)
„ Image sensor connector (J11)
„ HDMI connector (J25)
„ Expansion connector with all LCD controller signals for DM board connection (QTouch, TFT LCD
display with Touch Screen and backlight (J21, J22))
„ DAA connecter RJ11 6P4C type (J16)
„ CAN bus connectors RJ12 6P6C type (J18, J27)
„ ZigBee connector (J10)
„ Battery socket (J5)
„ Three expansion connectors with PIO signals (J1, J2, J3)
„ Test points; various test points are located throughout the board
Downloaded from Elcodis.com electronic components distributor