Atmel AVR10004: RCB256RFR2 – Hardware User Manual [APPLICATION NOTE]
32
Appendix D.
EVALUATION BOARD/KIT IMPORTANT NOTICE
This evaluation board/kit is intended for use for
FURTHER ENGINEERING, DEVELOPMENT, DEMONSTRATION, OR
EVALUATION PURPOSES ONLY.
It is not a finished product and may not (yet) comply with some or any technical or
legal requirements that are applicable to finished products, including, without limitation, directives regarding
electromagnetic compatibility, recycling (WEEE), FCC, CE or UL (except as may be otherwise noted on the board/kit).
Atmel supplied this board/kit “AS IS,” without any warranties, with all faults, at the buyer’s and further users’ sole risk.
The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the user indemnifies
Atmel from all claims arising from the handling or use of the goods. Due to the open construction of the product, it is the
user’s responsibility to take any and all appropriate precautions with regard to electrostatic discharge and any other
technical or legal concerns.
EXCEPT TO THE EXTENT OF THE INDEMNITY SET FORTH ABOVE, NEITHER USER NOR ATMEL SHALL BE
LIABLE TO EACH OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.
No license is granted under any patent right or other intellectual property right of Atmel covering or relating to any
machine, process, or combination in which such Atmel products or services might be or are used.
Mailing Address: Atmel Corporation, 1600 Technology Drive, San Jose, CA 95110
Copyright © 2013, Atmel Corporation
