Atmel ICE50, Руководство пользователя

Страница: 20 / 74

General Description
3-6 ICE50 User Guide
2523A–AVR–11/02
Figure 3-7. Power Switch and Connector
3.3.8 Power Connector The Power Connector on the ICE50 system is a standard type with 2.1 mm center tap.
Ground should be connected to the center tap. For more information about power
requirements and operating conditions see the Power System Description. See Figure
3-7.
3.4 Personality
Adapter
Description
The personality adapters of the ICE50 provides the physical adaption between the
ICE50 and the target device.
3.4.1 Personality Adapter
Description ICE50 is supplied with a range of personality adapters. These adapters map the pinout
from the ICE50 POD to each of the microcontrollers it supports. Each adapter includes
an identification code that the ICE50 and AVR Studio use for automatic device detec-
tion. The ICE50 package contains the following Personality Adapters:
Each adapter corresponds to one pinout type and supports one or more AVR microcon-
trollers. Table 3-2 shows which devices are supported by the different Personality
Adapters.
Table 3-2. Personality Adapters
Device Use Personality Adapter Named Seral Number
ATmega16 m32 A9902.3.1310.A
ATmega128 m128 W10635SDF
ATmega32 m32 A9902.3.1310.B
ATtiny28/29 t28/t29 A9902.3.1350.B
ATtiny26 t26 A9902.3.1370.A
ATmega162 m162 A9902.3.1300.B
ATmega8 m8 A9902.3.1390.C
ATmega169 m169 W10634SDF