Atmel AVR128 Скачать руководство пользователя страница 8

Atmel Corporation

1600 Technology Drive, San Jose, CA 95110 USA

T:

 (+1)(408) 441.0311

F:

 (+1)(408) 436.4200

|

www.atmel.com

©

 2016 Atmel Corporation. / Rev.: Atmel-0934C-Setup-and-Use-of-the-AVR-Analog-Comparator_AVR128_Application Note-07/2016

Atmel

®

, Atmel logo and combinations thereof, Enabling Unlimited Possibilities

®

, AVR

®

 and others are registered trademarks or trademarks of Atmel Corporation in

U.S. and other countries. Other terms and product names may be trademarks of others.

DISCLAIMER:  The  information  in  this  document  is  provided  in  connection  with  Atmel  products.  No  license,  express  or  implied,  by  estoppel  or  otherwise,  to  any
intellectual  property  right  is  granted  by  this  document  or  in  connection  with  the  sale  of  Atmel  products.  EXCEPT  AS  SET  FORTH  IN  THE  ATMEL  TERMS  AND
CONDITIONS OF SALES LOCATED ON THE ATMEL WEBSITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED
OR  STATUTORY  WARRANTY  RELATING  TO  ITS  PRODUCTS  INCLUDING,  BUT  NOT  LIMITED  TO,  THE  IMPLIED  WARRANTY  OF  MERCHANTABILITY,
FITNESS  FOR  A  PARTICULAR  PURPOSE,  OR  NON-INFRINGEMENT.  IN  NO  EVENT  SHALL  ATMEL  BE  LIABLE  FOR  ANY  DIRECT,  INDIRECT,
CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS AND PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this
document and reserves the right to make changes to specifications and products descriptions at any time without notice. Atmel does not make any commitment to
update  the  information  contained  herein.  Unless  specifically  provided  otherwise,  Atmel  products  are  not  suitable  for,  and  shall  not  be  used  in,  automotive
applications. Atmel products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life.

SAFETY-CRITICAL, MILITARY, AND AUTOMOTIVE APPLICATIONS DISCLAIMER: Atmel products are not designed for and will not be used in connection with any
applications where the failure of such products would reasonably be expected to result in significant personal injury or death (“Safety-Critical Applications”) without
an  Atmel  officer's  specific  written  consent.  Safety-Critical  Applications  include,  without  limitation,  life  support  devices  and  systems,  equipment  or  systems  for  the
operation of nuclear facilities and weapons systems. Atmel products are not designed nor intended for use in military or aerospace applications or environments
unless  specifically  designated  by  Atmel  as  military-grade.  Atmel  products  are  not  designed  nor  intended  for  use  in  automotive  applications  unless  specifically
designated by Atmel as automotive-grade.

Содержание AVR128









Отзывы: