background image

 

8296A-AVR-03/10 

 

 

Headquarters  

International 

 

 

Atmel Corporation

 

2325 Orchard Parkway

 

San Jose, CA 95131

 

USA

 

Tel: 1(408) 441-0311

 

Fax: 1(408) 487-2600

 

 

 

Atmel Asia

 

Unit 1-5 & 16, 19/F 
BEA Tower, Millennium City 5
418 Kwun Tong Road 
Kwun Tong, Kowloon 
Hong Kong 
Tel: (852) 2245-6100 
Fax: (852) 2722-1369 

 

 
 
 
Product Contact

 

 

Atmel Europe

 

Le Krebs

 

8, Rue Jean-Pierre Timbaud

 

BP 309

 

78054 Saint-Quentin-en-
Yvelines Cedex

 

France

 

Tel: (33) 1-30-60-70-00 

 

Fax: (33) 1-30-60-71-11

 

 

Atmel Japan

 

9F, Tonetsu Shinkawa Bldg.

 

1-24-8 Shinkawa

 

Chuo-ku, Tokyo 104-0033

 

Japan

 

Tel: (81) 3-3523-3551

 

Fax: (81) 3-3523-7581

 

 

 

Web Site

 

 

 

Technical Support

 

 

 

Sales Contact

 

 

 

 
 

 

Literature Request

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Disclaimer:

 The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any 

intellectual property right is granted by this document or in connection with the sale of Atmel products. 

EXCEPT AS SET FORTH IN ATMEL’S TERMS AND 

CONDITIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED 
OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, 
FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, 
CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, 
BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS 
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

 Atmel makes no representations or warranties with respect to the accuracy or completeness of the 

contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Atmel does not make any 
commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, 
automotive applications. Atmel’s products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life. 

 
 
 
 
 

© 2010 Atmel Corporation. All rights reserved

. Atmel®, Atmel logo and combinations thereof, AVR®, AVR® logo and others, are the 

registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others. 

 

Содержание AVR1014


















Отзывы: