16
ATZB-EVB-XXX-XXX User Manual
AVR-09-2011
SerialNet
application lets the AT-commands be interpreted
locally or forwarded for execution on remote nodes;
Hardware Test
(see Section 4.7) is a simple application
which tests major ATZB-EVB (MeshBean) board
components for correct operation;
Range Measurement Tool
is an application intended to
measure radio performance of ZigBit-based devices and/or
to make comparison with platforms of other manufacturers.
Usage essential information and guiding instructions are
given in [9];
WSNDemo
with WSN Monitor;
Serial Bootloader
is a software utility designed to program
an application code into WSN nodes through USB or serial
port, without using JTAG. See the description of Serial
Bootloader in Section 7.
The following sample applications are delivered with source code (referenced as
given in brackets):
WSNDemo
(
WSNDemo
)
Low Power Networking (
Lowpower
)
Ping-Pong
(
Pingpong
)
Peer-To-Peer Data Exchange (
Peer2peer
)
Blink minimal sample application (
Blink
)
Hardware Test (
HardwareTest
).
The WSNDemo application is a featured ZDK application demonstrating the WSN
performance. It is presented in details in Section 5. The source code for
WSNDemo
is
available with Complete Support Package only.
The rest of programs are sample implementations triggering common BitCloud APIs.
Blink is a minimal application (see Section 8.3). Low Power Ping-Pong, and Peer-To-
Peer applications are introduced in Section 8.4.
4 Getting Started
4.1 Overview
This section describes the system requirements and ZDK deployment. It also
provides how-to instructions on handling the boards, testing WSN functionality and
performing local hardware tests.
4.2 System Requirements
Before using the Kit, please ensure that the following system requirements are met
(see Table 9).
Table 9. System requirements
Parameter Value
Note
PC
CPU
Intel Pentium III or
higher, 800 MHz
RAM
128 MB
