Getting Started Guide for ATWINC3400 W-Fi using SAM D21 Xplained Pro [USER GUIDE]
Atmel-42640A-Getting-Started-Guide-for-ATWINC3400WiFi-using-SAMD21-Xplained-Pro_UserGuide_02/2016
1
3
13
SAMD21 flashing script: please connect edbg and power up the board.
Firmware check OK
Chiperase completed successfully
Firmware check OK
Programming completed successfully.
Mode UART
Downloading Image...
********************************************
* >Programmer for WINC3400 SPI Flash< *
* Owner: Atmel Corporation *
********************************************
. . .
********************************************
* >TX Gain Builder for WINCxxxx < *
* Owner: Atmel Corporation *
********************************************
. . .
**************************************************
* > WINC3400 Root Certificate Flash Downloader < *
**************************************************
. . .
Done
>>This task finished after 2.92 sec
OK
#######################################################################
## ##
## ######## ### ###### ###### ##
## ## ## ## ## ## ## ## ## ##
## ## ## ## ## ## ## ##
## ######## ## ## ###### ###### ##
## ## ######### ## ## ##
## ## ## ## ## ## ## ## ##
## ## ## ## ###### ###### ##
## ##
#######################################################################
Downloading ends successfully
FAILED firmware download. The following information will be displayed on the command
window.
