PANCoordinator-EK Kit User Manual [USER GUIDE]
Atmel-43106C-ATPL- PANCoordinator-EK Kit User Manual-UserGuide_06-Oct-16
7
7
1.
Evaluation Kit Specifications
1.1
Safety recommendations
These development boards must be only used by expert technicians. ATPL250ABN is directly powered
from mains grid, so hazardous voltage (100/230V
AC
) is present on the board. To avoid user access to
dangerous parts, ATPL250ABN must always be used within its enclosure. All required connectors and
configuration jumpers are easily accessible without electrical shock risk.
A normal use of ATPL250ABN does not require removing the enclosure
cover. If this action is necessary, it must be performed by qualified staff
after being sure that mains connection has been previously removed.
Be careful it is only for indoor use.
This development board does not have any switch on mains connection to switch on or off it. It must always
be connected to an easy accessible mains socket.
Do not connect any probe to high voltage sections if the board is not isolated from the mains supply to avoid
damaging of measurement instruments.
Coupling
boards’ kits are shipped in a protective anti-static package.
The boards system must not be subjected to high electrostatic
discharge.
We strongly recommend using a grounding strap or similar ESD
protective device when handling the board in hostile ESD
environments (offices with synthetic carpet, for example) without
enclosure. Avoid touching the component pins or any other metallic
element on the board.
ATPL250ABN is a CE mark product which passes EN60950-1 safety standard, EN50065-1, EN50065-2-3,
EN50065-7 EMC and FCC (as current carrier system) standards. It also satisfies Pb-Free and ROHS
directive.
ATMEL does not assume responsibility for the consequences arising
from any improper use of this board.
Boards’ kits are intended for further engineering, development, demonstration, or evaluation purposes only.
It is not a finished product except as may be otherwise noted on the board/kit.
1.2
Electrical characteristics
This section shows the electrical characteristics of the kit’s boards. See the following tables:
Table 1-1.
Power Supply Requirements.
Parameter
Condition
Min.
Typ.
Max.
Unit
AC mains Voltage Range
100
115/230
250
V
AC
Mains Frequency
50/60
Hz
Maximum Input Current
200
(1)
mA
Isolation Voltage
ACDC power supply and PLC coupling transformer
3000
V
AC