3
ATF15xx-DK3-U Development/Programmer Kit [USER GUIDE]
Atmel-8961A-CPLD-ATF15xx-DK3-U-Development-Kit-UserGuide_072015
Kit Features
CPLD Development/Programmer Board
10-pin JTAG-ISP Port
Regulated Power Supply Circuits for 9VDC Power Source
Selectable 5V, 3.3V, 2.5V, or 1.8V I/O Voltage Supply
Selectable 1.8V, 3.3V, or 5.0V Core Voltage Supply
44-pin TQFP Socket Adapter Board
Headers for I/O Pins of the ATF15xx Device
2MHz Crystal Oscillator
Four 7-segment LED Displays
Eight Individual LEDs
Eight Push-button Switches
Global Clear and Output Enable Push-button Switches
Current Measurement Jumpers
Logic Doubling CPLDs
ATF15xx ISP CPLD with Logic Doubling Architecture
ATF15xx ISP Download Cable
5V, 3.3V, 2.5V, or 1.8V ISP Download Cable for the Universal Serial Bus (USB) port of a PC
There are two versions of the ATF15xx USB ISP Download Cable; ATDH1150USB and
ATDH1150USB-K. They are built by two different vendors but have identical circuit design, and the
Atmel Ordering Code is ATDH1150USB. The ATDH1150USB-K is built by Kanda (
www.kanda.com
)
and it can be directly purchased from Kanda. More details are available online at
www.atmel.com/tools/ATDH1150USB.aspx
.
PLD Development Software
The Atmel PLD development software tools are available online for PLD designer’s use of the ATF15xx
ISP CPLDs. Please reference the Overview document, “PLD Design Software Overview” available at:
http://www.atmel.com/images/atmel-3629-pld-design-software-overview.pdf
System Requirements
The minimum hardware and software required to program an ATF15xx ISP CPLD device designed
using the Atmel ProChip Designer Software on the CPLD Development/Programmer Board through
the Atmel ATMISP (ATF15xx CPLD ISP Software) are:
x86 or x64 Microprocessor-based Computer
Windows XP
®
or Windows 7
128-MByte RAM
500-MByte Free Hard Disk Space
Windows-supported Mouse
Available USB 1.1 / 2.0 / 3.0 Port
9VDC Power Supply with 500mA of Supply Current
SVGA Monitor (800 x 600 Resolution)
Downloaded from
Downloaded from
Downloaded from
