Atmel ATAVRAUTO102, Руководство пользователя

Страница: 7 / 19

ATAVRAUTO102 User Guide 3-5
7720A–AVR–06/07
Section 3
Using the ATAVRAUTO102
3.1 Using the ATAVRAUTO102 board
The ATAVRAUTO102 can be used as a spy on a network or can act as a single Slave or
Master node.
LIN0 can be sniffer/slave or master.
LIN1 can be sniffer or slave.
CAN can be sniffer or master.
Steps to follow:
Connect your board to your PC using the USB cable.
Link all networks you want to work with.
If LIN0 is a master node, set the jumper MAST.
Run “X-Analyser”.
3.2 Updating the ATAVRAUTO102 firmware
For the future firmware revision, the ATAVRAUTO900 will be used to update
AT90CAN128 and AT90USB1287 microcontrollers.
Note: When programming, NISP_C and NISP_U jumpers have to be removed.
The AT90CAN128 and the AT90USB1287 can be programmed using specific SPI links.
This sub section will explain how to connect the programmer.
The FLASH, EEPROM memory (and all Fuse and Lock Bit Option ISP-programmable)
can be programmed individually or with the sequential automatic programming option.