Atmel AT91SAM7X-EK, Руководство пользователя

Страница: 15 / 33

Board Description
AT91SAM7X-EK Evaluation Board User Guide 3-5
6195E–ATARM–22-Mar-07
3.3 AT91SAM7XC
Microcontroller
!
Incorporates the ARM7TDMI
®
ARM
®
Thumb
®
Processor
– High-performance 32-bit RISC Architecture
– High-density 16-bit Instruction Set
– Leader in MIPS/Watt
– EmbeddedICE
™
, Debug Communication Channel Support
!
Internal High-speed Flash
– 256 Kbytes (AT91SAM7XC256) Organized in 1024 Pages of 256 Bytes
– 128 Kbytes (AT91SAM7XC128) Organized in 512 Pages of 256 Bytes
– Single Cycle Access at Up to 30 MHz in Worst Case Conditions
– Prefetch Buffer Optimizing Thumb Instruction Execution at Maximum Speed
– Page Programming Time: 6 ms, Including Page Auto-erase,
Full Erase Time: 15 ms
– 10,000 Write Cycles, 10-year Data Retention Capability,
Sector Lock Capabilities, Flash Security Bit
– Fast Flash Programming Interface for High Volume Production
!
Internal High-speed SRAM, Single-cycle Access at Maximum Speed
– 64 Kbytes (AT91SAM7XC256)
– 32 Kbytes (AT91SAM7XC128)
!
Memory Controller (MC)
– Embedded Flash Controller, Abort Status and Misalignment Detection
!
Reset Controller (RSTC)
– Based on Power-on Reset Cells and Low-power Factory-calibrated Brownout
Detector
– Provides External Reset Signal Shaping and Reset Source Status
!
Clock Generator (CKGR)
– Low-power RC Oscillator, 3 to 20 MHz On-chip Oscillator and one PLL
!
Power Management Controller (PMC)
– Power Optimization Capabilities, Including Slow Clock Mode (Down to 500 Hz)
and Idle Mode
– Four Programmable External Clock Signals
!
Advanced Interrupt Controller (AIC)
– Individually Maskable, Eight-level Priority, Vectored Interrupt Sources
– Two External Interrupt Sources and One Fast Interrupt Source, Spurious
Interrupt Protected
!
Debug Unit (DBGU)
– 2-wire UART and Support for Debug Communication Channel interrupt,
Programmable ICE Access Prevention
!
Periodic Interval Timer (PIT)
– 20-bit Programmable Counter plus 12-bit Interval Counter
!
Windowed Watchdog (WDT)