manualshive.com logo in svg

Atmel AT88RF1354, Руководство пользователя, Страница: 13 / 69

Поделиться
Скачать
Atmel AT88RF1354 Скачать руководство пользователя страница 13

AT88RF1354 SPI User Guide For CryptoRF 

 

 

 

2.2 

Clear Command [$0E] 

This command aborts a command in progress, turns off the RF field, clears the RAM buffer, and 
places the reader in the idle state. 

 

2.2.1 

Command Format 

PICC

Host

Reader

Send one byte

ISTAT goes High

ACK/NACK

Clear ($0E)

ISTAT stays Low

Get one byte

Command Processing

Response Bytes

 

2.2.2 

Example 

String Decode  >  O0001 Host sends one byte thru microcontroller to AT88RF1354 serial port.

  > 

0E

AT88RF1354 CLEAR command.

Wait for AT88RF1354 ISTAT pin state.

ISTAT goes High.

The AT88RF1354 buffer has data ready.  Data must be read before the next command can be issued.

String Decode  > 

I0001 Host gets one byte from AT88RF1354 buffer.

  > 

01

AT88RF1354 Response:  $01 (Acknowledge).

ISTAT stays Low.

The AT88RF1354 buffer is empty.  The AT88RF1354 will now accept a new command.

   

2.2.3 

Operation 

The Clear command stops a command in progress, turns off the RF field, and clears the RAM 
buffer.  The contents of the error register are reset by the Clear command.  The contents of the 
other registers are unchanged.   

 

 

 2-3 

 

 8586A—RFID—5/09 

Содержание AT88RF1354






































































Отзывы:

Нет отзывов