Atmel AT43DK355, Руководство пользователя, Страница: 11 / 31

Getting Started
AT43DK355 USB Controller Dev. Kit User Guide 2-5
3429C–USB–7/04
Figure 2-4. USB HID Demo Utility Window
2.6.6 Binary Files for
Uploading The ready-made programmable binary files for loading are located on the CD-ROM in
the \USBWizard\Binary\ directory. The files have extension *.hex. They are located
under three subdirectories:
1. OCR1A
2. OCR1B
3. PWM_ADC_GPIO
2.7 Checking the
Hardware
The Development Board comes with a preprogrammed application. Connect the USB
upstream port of the Development Board to the downstream port of the host (i.e.: PC).
Then, check its existence in the Device Manager of the System Control Panel win-
dow. If the Development Board is working properly, it should show up in the PC as a HID
compliant device.
Another way to check the proper functioning of the board is to connect a USB device
such as a mouse to one of the downstream USB hub ports on the Development Board.
The Development Board is functioning properly if the mouse is detected by the PC.