Atmel AT32UC3C0128C Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 37

background image

32166A–AVR32806–06/11

Atmel Corporation

2325 Orchard Parkway
San Jose, CA 95131
USA

Tel

: (+1)(408) 441-0311

Fax

: (+1)(408) 487-2600

Atmel Asia Limited

Unit 1-5 & 16, 19/F
BEA Tower, Millennium City 5
418 Kwun Tong Road
Kwun Tong, Kowloon
HONG KONG

Tel

: (+852) 2245-6100

Fax

: (+852) 2722-1369

Atmel Munich GmbH

Business Campus
Parkring 4
D-85748 Garching b. Munich
GERMANY

Tel

: (+49) 89-31970-0

Fax

: (+49) 89-3194621

Atmel Japan

9F, Tonetsu Shinkawa Bldg.
1-24-8 Shinkawa
Chuo-ku, Tokyo 104-0033
JAPAN

Tel

: (+81)(3) 3523-3551

Fax

: (+81)(3) 3523-7581

© 2011 Atmel Corporation. All rights reserved.

Atmel

®

, Atmel logo and combinations thereof, AVR

®

, AVR

®

logo, and others are registered trademarks or trademarks of Atmel Corpo-

ration or its subsidiaries. Windows

®

and others are registered trademarks or trademarks of Microsoft Corporation in U.S. and or other

countries. Other terms and product names may be trademarks of others.

Disclaimer:

The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to

any intellectual property right is granted by this document or in connection with the sale of Atmel products.

EXCEPT AS SET FORTH IN THE ATMEL

TERMS AND CONDITIONS OF SALES LOCATED ON THE ATMEL WEBSITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY
EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT,
INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS AND PROF-
ITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Atmel makes no representations or warranties with respect to the accuracy or com-

pleteness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice.
Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suit-
able for, and shall not be used in, automotive applications. Atmel products are not intended, authorized, or warranted for use as components in applica-
tions intended to support or sustain life.

«
...
35
36
37

Содержание AT32UC3C0128C






































Отзывы:

Нет отзывов

Похожие инструкции для AT32UC3C0128C

Бренд: NCR Страницы: 6

Бренд: Olsberg Страницы: 68

Бренд: U.S. Divers Страницы: 22

Бренд: Koer Страницы: 6

Бренд: Technische Alternative Страницы: 68

Бренд: AUMA Страницы: 24

Бренд: Aqua Lung Страницы: 24

Бренд: Delta Страницы: 16

SmarTemp Control fx

Бренд: Webasto Страницы: 8

Бренд: Kelly Страницы: 35

Бренд: Davey Страницы: 8

Бренд: Jetter Страницы: 28

Бренд: Avery Weigh-Tronix Страницы: 48

Mini-PLC STG-660 CAN

Бренд: Barth Страницы: 7

Бренд: Trane Страницы: 6

Бренд: Soyal Страницы: 4

Triad Controls SE Series

Бренд: A-T Controls Страницы: 13

DMX-LED-Dimmer BB4

Бренд: DMX4ALL Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды