Atmel AT21CSMK100 Скачать руководство пользователя страница 21

Страница: 21 / 24

AT21CSMK100 Atmel Single-Wire Serial EEPROM USB Evaluation Kit User Guide

Atmel-8993-SEEPROM-AT21CSMK100-UserGuide

7 Troubleshooting Guide

Issue:

The ATMembase no longer has the USB Bootloader Installed

Resolution:

In order to reprogram the USB bootloader, the user needs an Atmel JTAG ICEIII and the latest

version of Atmel Studio installed. Plug in the JTAG ICEIII and power the ATMembase using

another USB port. Plug the JTAG ICEIII cable into the JTAG header found on the ATMembase

referring to

Figure 32

as needed.

Figure 32. ATMembase and JTAG ICEIII Connector

In Atmel Studio, navigate to Device Programming under Tools. Select the JTAG ICEIII as your

tool and AT90USB1287 as your Device, click Apply. Navigate to Memories and browse for the

bootloader under Flash (128Kb). Navigate to:
C:\Program Files (x86)\Atmel\Atmel Seeprom\2Wire\bootloader\
Select the at90usb128-bl-usb-1_0_1.hex file, and press the Program Button. Navigate to Fuses

and set the fuses according to the Fuse Values seen in

Figure 33

. Program the ATMembase.

Figure 33. ATMembase Fuse Settings

Once the Fuse Values are programmed, please close Device Programming and Exit Atmel

Studio. Open FLIP and follow the instructions outlined in the Application Note found on

Atmel.com at:

http://www.atmel.com/Images/Atmel-8991-SEEPROM-Upgrade-Kit-FW-Using-FLIP-

ApplicationNote.pdf

The use of external USB hubs can induce inconsistent programming behavior of the

ATMembase. Therefore, it is recommended to connect the ATMembase to a USB

port that is directly connected to the user’s computer during Flip DFU programming.

Содержание AT21CSMK100

























Результаты поиска

Содержание AT21CSMK100

Отзывы:

Бренды по названию

Популярные бренды

Atmel AT21CSMK100, Руководство пользователя

Результаты поиска

Содержание AT21CSMK100

Отзывы:

Бренды по названию

Популярные бренды