AT04357 RCB256RFR2-XPRO User Guide [USER GUIDE]
TBDA-MCU-09/2013
9
3. If not already preprogrammed - program the node with the Performance Analyzer FW available in the
"Wireless Performance Analyzer Firmware extension" or from source code provided in ASF.
If using an Wireless board with a uC embedded, the Performance Analyzer FW has to be programmed
using the Bootloader or JTAGICE as described in the "Getting started " chapter
If using a extension board which do not have a uC embedded, the Performance Analyzer FW has to be
programmed on the Xplained PRO board using the EBDG as described in the "Getting started " chapter
2.3
Program use
How to get started
1. Connect the Wireless board assembly, with the Performance Analyzer FW programmed, to the PC USB
connector and power on, a COM port should now be available for the kit.
2. Power on any other wireless node assemblies of similar frequency, running the Performance Analyzer FW,
and use it as a reference.
3. Start Performance Analyzer GUI, connect to the kit via the COM port and follow the quick start guide.
