Main Menu
To enter the MAIN MENU please tap
MENU
on any of the compressor
screens. Here you can change the input and output level meter
TYPE
(PEAK or
RMS) and the
PEAK HOLD
time constant. In RMS mode, the value in decibels is
shown below the input/output level meters. If peak hold is set to
FAST
then the peak
value markers will fall within 2 seconds after the signal disappears. In
INF
(infinity)
mode, user can tap on one of the meters to reset the peak value markers.
The next section in the menu is dedicated to saving and loading presets. By
pressing
LOAD
icon, you will enter presets list. Move
P1 knob
to search the list, and
press LOAD to recall selected preset.
After pressing
SAVE
in Main Menu, choose free slot by moving P1 knob and
press SAVE again. Use onscreen keyboard to enter new name for the preset. You can
also RENAME or DELETE unused preset.
On the presets list you may notice the
RED or GREEN dot
beside the number
and name. The dot shows up when the preset was loaded or saved. If you’ve loaded a
preset, but haven’t made any changes to it, the dot will be GREEN. But if any
changes have been made, the dot will turn RED. You will also get
UNSAVED!
warning on every screen of the Mastering Compressor – this is a sign that you should
save your preset again before you turn the unit off.
19
