Installation Guide
AT-VTP-800
4
Velocity Device Setup
Set Static IP
IP Address
Subnet Mask
Default
Gateway
DNS Server
75.75.75.75
10.0.0.1
255.255.255.0
10.0.0.123
CONTINUE
Initial Setup
CONTINUE
You will be guided through the setup process in the next few screens.
4
When the unit displays the IP information, press
CONTINUE
.
a
If the touch panel does not display an IP, select the Set Static IP slider.
b
Assign the unit a static IP. Ensure there are no other devices on the network with the
same IP to avoid connection issues.
5.
The unit will load a new screen. Change the Device Alias (if needed) to help differentiate
when there are multiple touch panels at a site.
6. Press the
SCAN FOR GATEWAYS
button.
Velocity Device Setup
Device Alias
URL
0.0.0.0
Velocity Touch Panel 800
SCAN FOR GATEWAYS
SAVE & CONTINUE
BACK
Scanning for Gateways
CANCEL
USE
10.0.0.234
Scanning for Gateways
CANCEL
7
The touch panel will scan for new gateways. Once the correct gateway is found, press
USE
.
