Atlona OmniStream AT-OMNI-521, Руководство по установке, Страница: 2 / 12

2
Installation Guide
AT-OMNI-521
AT-OMNI-521
ETHERNET RS-232 / IR
RX TX
1
HDMI OUT
TM
O
MNI
S
TREAM
LINK PWR
R
-
T
YPE
ID
AT-OMNI-521
ETHERNET RS-232 / IR
RX TX
1
HDMI OUT
TM
O
MNI
S
TREAM
LINK PWR
R
-
T
YPE
ID
AT-OMNI-521
ETHERNET RS-232 / IR
RX TX
1
HDMI OUT
TM
O
MNI
S
TREAM
LINK PWR
R
-
T
YPE
ID
1 PWR
This LED indicator is green when the unit
is powered.
2 LINK
This LED indicator is green when the link
integrity between the decoder and the
switch is good.
3 ID
This button provides two functions:
(1) Press and release this button to send
a broadcast network notification to any
devices that may be listening (AMS).
(2) Press and hold this button for 30
seconds to perform a factory-reset
of the unit. Refer to the OmniStream
R-Type Decoder User Manual for more
information.
4 REBOOT
Use a pointed object to press this
recessed button and reboot the unit.
5 HDMI OUT
Connect an HDMI cable from this port to a
UHD/HD display.
6 ETHERNET
Connect an Ethernet cable from this port
to the Local Area Network (LAN).
7 RS-232 / IR
Use the included captive screw connector
to connect a control system and/or an IR
emitter or extender. Bidirectional IR pass-
through is supported, allowing a device
to be controlled from either the headend
or the decoder endpoint Refer to RS-232
and IR on page 5 for more information.
Panel Descriptions
1 2 3 4
7 5 6