manualshive.com logo in svg

Atlona OmniStream AT-OMNI-512, Руководство пользователя

Поделиться
Скачать
Atlona OmniStream AT-OMNI-512 Скачать руководство пользователя страница 48

AT-OMNI-512

48

Mode

Click this drop-down list to select the desired serial mode:  Infrared or Serial.

Baud Rate

Click this drop-down list to select the desired baud rate.

Data

Click this drop-down list to select the number of data bits.

Parity

Click this drop-down list to select the parity bit.

Stop

Click this drop-down list to select the stop bit.

Flow

Click this drop-down list to select the type of flow control.

Name

 

The name used by AMS to identify the serial port.

Port

Click this drop-down list to select the port:  

serial_port1

, 

serial_port2

, or 

Not Used

.

 

Mode

Click this drop-down list to select the desired control mode.  Currently, only cli (command line interface) is supported.

 

Command

Each of these The 

Command

 blocks are used to enter the command string for the desired operation:  Display Off, 

Display On, Volume Down, and Volume Up. 

The AMS Interface

Interpret on

 

Click this drop-down list to select where the command will be interpreted.

 

 

 

 

 

 

ASCII

Enter the ASCII representation of the command string in this field.

HEX

Enter the hexadecimal representation of the command in this field.

Interpret on

Description

decoder

Commands are interpreted at the decoder.

encoder

Commands are interpreted at the encoder.

NOTE:

  

When entering the command string, it is not required to enter the string under both the ASCII 

and HEX fields.  The encoder requires that one field be completed.

Serial Configuration

Command

Содержание OmniStream AT-OMNI-512




































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды