Atlona Etude AT-ETU-SYNC, Руководство по установке

Страница: 4 / 8

Installation Guide
4
The AT-ETU-SYNC includes 10 EDID modes, which can be selected using the EDID dial.
Refer to the User Manual for information on EDID mode 0 and programming.
Mode Resolution / Audio Support Mode Resolution / Audio Support
0 Programming mode 5 4K 60 4:2:0 / multichannel (HD lossless)
1 1080p 3D / 2 channel 6 4K 60 4:2:0 HDR / 2 channel
2 1080p 3D / multichannel
(lossless)
7 4K 60 4:2:0 HDR / multichannel
(HD lossless)
3 1080p DVI 8 4K 60 4:4:4 8-bit / 2 channel
4 4K 60 4:2:0 / 2 channel 9 4K 60 4:4:4 8-bit / multichannel
(HD lossless)
1. Rotate the EDID dial to the desired EDID mode (0 - 9). Refer to the table above for a listing
of available EDID modes.
2. Connect an HDMI cable from the display to the HDMI OUT port on the AT-ETU-SYNC.
3. Connect another HDMI cable from the source to the HDMI IN port on the AT-ETU-SYNC.
4. Power the display.
5. Connect the 5V DC power supply between the
FW
/
USB
port, on the AT-ETU-SYNC,
and an available AC outlet.
6. Power the source.
7. Power the sink device.
8. The source will use the selected EDID mode when sending audio/video data to the sink
device.
Selecting an EDID
NOTE: The EDID dial can be set to any EDID mode, while the AT-ETU-SYNC is
powered and connected to the system.
2
EDID dial
IMPORTANT: By default, EDID mode 0 is blank. Refer to the User Manual
for information on using EDID mode 0 and programming.