Atlona AT-UHD-SW-5000ED Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 25

Atlona AT-UHD-SW-5000ED Скачать руководство пользователя страница 14

14

atlona.com

Toll free: 1-877-536-3976

Local: 1-408-962-0515

System Settings

Display Auto Power On - When enabled, the unit will send a programmed command to the

display to turn on after detecting an A/V signal

Display Auto Power Off - When enabled, the unit will send a command to the display to turn off

after not detecting an A/V signal

Lamp Cool Down Timer

(10-300)

- Used with a projector whose lamp cannot be turned on for up

to 5 minutes after being shut off. Match settings with lamp delay on projector

Auto Power off timer

(10-240)

- Sets the period of time between the loss of A/V signal and when

the “Display Off” command is sent

Note:

LED will blink red for the auto power off time period then go solid

Note:

All functionality remains, only the HDBaseT output is turned off

Display Warm Up Timer

(10-300)

- Sets the period of time after the display is turned on, that the

power button will be locked

Note:

LED will blink green for the warm up timer period and then stay solid

Note:

When timers are set to 0 seconds, they will disable the timers’ functions

Control Type - Select whether the display on/off commands are sent using RS-232, TCP/IP, or

CEC

Feedback Verify

On: If receiving no feedback, the product will send the command up to 4 times

Off: The command will only be sent once, whether feedback is received or not

«
...
12
13
14
15
16
...
»

Содержание AT-UHD-SW-5000ED


























Отзывы:

Нет отзывов