Installation Guide
8
AT-RON-448
Troubleshooting
Problem
Solution
How do I perform a
firmware update on the
AT-RON-448
If updated firmware is available, both firmware and update
instructions can be found under the Firmware tab of each of
the following links. Note that if new firmware is not available,
then the Firmware tab will not be displayed.
http://www.atlona.com/product/AT-RON-448
Does the Rondo
series provide external
automation control?
No.
3D content is not being
displayed.
•
If using INT (internal) EDID mode, all connected displays
must be able to display 3D content. If only one of the
connected displays is not 3D-capable, then none of the
displays will show 3D content.
•
To pass 3D content when not all displays support 3D,
connect a 3D display to Output 1, then use the “learn
EDID” procedure.
Version 1
© 2019 Atlona Inc. All rights reserved. “Atlona” and the Atlona logo are registered trademarks of Atlona Inc. All other brand names and trademarks or registered
trademarks are the property of their respective owners. Pricing, specifications and availability subject to change without notice. Actual products, product images, and
online product images may vary from images shown here.
Toll free US
International
atlona.com
•
877.536.3976
•
41.43.508.4321
