7
1.
Standby Mode
Note: Note: Turning the unit System Power Off over RS232 will blank-out the displays, leaving only the
Power Switch LED on. Hard resetting the unit when in (System Power Off) mode will return the unit to
its normal operation and unlock the front panel. Even while the unit is turned off by RS232, it will contin-
ue to accept and act upon switching commands. This allows you to set up a scene before soft powering
the unit on and enabling the video outputs. The unit will still return to its status and change messages in
response to commands sent while in the System.
2. Power Off Mode
SBSYSMON
(&* #/*N)49))P
SBSYSMOF
(G & &)#/*N)49P
; 4 #4 %
SBALOFAK
(; #/*
SBALONAK
(; #/*
!"O&; #/*N)4P
SBSYSMOF
-SendS
BALOFAK
(F#
3. Front Panel Lock
Note : Hard resetting the unit will unlock the Front Panel controls.
SBSYSMLK
(=%) #C%*/#/*
SBSYSMUK
(;
; 4 #4 %
SBSYSLOK
(%/:#
SBSYSULK
(%/;#
!"O:G&
SBSYSMLK
-Send
SBSYSLOK
(F#
4. Unit Reset
SBSYSMLK
(F*&&&
; 4 #4 %
SBRSTACK
(; %%9&&&
!"O&&&
SBALLRST
-Send
SBRSTACK
(F#
RS-232 PROTOCOL COMMANDS
