www.atlona.com | toll free:
1-877-536-3976
For International: 1-
408-962-0515
3
SETTING UP CAT5E/6/7
NO POWER ON THE EXTENDERS
CAT5E or higher is recommended for use withal ATLONA units. If cables are run in the walls make
sure to stay away from light fixtures, electrical boxes, fluorescent lights, and any or other electrical
cables to reduce and prevent signal degradation. T568B termination is recommended to be used for
this device.
Pin T568A Pair T568B Pair Wire
T568A Color
T568B Color
Pins on plug face
(socket is reversed)
1
3
2
tip
white/green stripe
white/orange stripe
2
3
2
ring
green solid
orange solid
3
2
3
tip
white/orange stripe white/green stripe
4
1
1
ring
blue solid
blue solid
5
1
1
tip
white/blue stripe
white/blue stripe
6
2
3
ring
orange solid
green solid
7
4
4
tip
white/brown stripe
white/brown stripe
8
4
4
ring
brown solid
brown solid
1 2 3 4 5 6 7 8
Pin Position
If the unit is not powering-on double check the surge protector/outlet that the unit is connected to. A Volt
Meter can also be used to check the power supply; it needs to be outputting 5V DC. Only one power
supply needs to be used for this system either on transmitter or receiver side.
CONNECTING IR
IR OUT1
IR IN
IR OUT2
IR OUT1
IR OUT3
IR OUT2
1
1
2
AT-IR300R IR Extender
AT-IR300S IR Extender
Repeater