Atlona AT-HDVS-210U-TX-WP Скачать руководство пользователя

Страница: 24 / 88

AT-HDVS-210U-TX-WP

The Web GUI

Display Auto Power On

Set this value to

ENABLE

to send the command to power-on the display when an A/V signal is detected. Otherwise,

set to

DISABLE

to turn this feature off.

Display Auto Power Off

Set this value to

ENABLE

to send the command to power-off the display when an A/V signal is no longer present.

Otherwise, set to

DISABLE

to turn this feature off.

Lamp cool down timer (Sec.)

Sets the cool-down interval, in seconds, before the projector can be powered-off. During this time interval, the

projector will not accept any “power on” or “power off” commands until the last “power off” command has been

processed and the projector lamp has completed the cool-down cycle. Range: 0 to 300.

Auto power off timer

Sets the time interval, in seconds, between when the loss of A/V signal is detected and when the “Display Off”

command is sent. Range: 5 seconds to 1 hour.

Power on delay timer (Sec.)

Sets the time interval, in seconds, between when the system is powered-on, and when system can re-enter the Auto

Power Off state. All display-on commands are triggered immediately after an A/V source is connected. Range: 0 to

300.

Control Type

Sets the control method for sending commands. The following options are available: RS-232, IP, CEC.

Feedback Verify

Sets the feedback verification state. Click the toggle to enable or disable this feature. The following options are

available.

System Settings

Setting

Description

RS-232

RS-232 is used to send commands.

Commands are sent over IP.

CEC

Uses CEC to send commands.

Setting

Description

This is the default setting. The AT-HDVS-210-TX-WP will make four attempts to

send the command, if the feedback string is not acknowledged. After the fourth

attempt, the process will fail.

Off

Sends the command and ignores the feedback string.

Содержание AT-HDVS-210U-TX-WP

























































































Результаты поиска

Содержание AT-HDVS-210U-TX-WP

Отзывы:

Похожие инструкции для AT-HDVS-210U-TX-WP

Бренды по названию

Популярные бренды

Atlona AT-HDVS-210U-TX-WP, Руководство пользователя

Результаты поиска

Содержание AT-HDVS-210U-TX-WP

Отзывы:

Похожие инструкции для AT-HDVS-210U-TX-WP

Бренды по названию

Популярные бренды