4
Installation Guide
AT-HDR-EX-70-2PS
LINK
Description
Solid yellow
The link integrity between the transmitter and the receiver is
good.
Blinking yellow
No HDMI cable is connected between the source and the
transmitter or between the display (sink) and the receiver.
•
Check the HDMI cable connection between the
HDMI IN
port on the transmitter and the source device.
•
Check the HDMI cable connection between the
HDMI
OUT
port on the receiver and the display (sink).
•
Try connecting another HDMI cable between the source
and transmitter and/or between the display and the
receiver.
Off
The link integrity between the transmitter and the receiver is
compromised.
•
Check the Ethernet cable between the
HDBaseT IN
port
on the transmitter and the
HDBaseT OUT
port on the
receiver.
LED Indicators
The
POWER
and
LINK
LED indicator on the transmitter and receiver unit provides basic
information on the current status of the AT-HDR-EX-70-2PS. The information in the table below
applies to both the transmitter and receiver unit.
POWER
Description
Solid green
Unit is powered.
Off
Unit is not powered.
•
Verify that the locking connector is securely fastened to
the power receptacle.
•
Make sure that the power supply is connected to an
active AC outlet.
