Atlona AT-HDR-EX-70-2PS Скачать руководство пользователя страница 1

1

Installation Guide

AT-HDR-EX-70-2PS

4K HDR HDMI Over HDBaseT TX/RX Kit

AT-HDR-EX-70-2PS

The Atlona 

AT-HDR-EX-70-2PS

 is an HDBaseT transmitter/receiver kit for high dynamic range 

(HDR) formats. The kit is HDCP 2.2 compliant and supports 4K/UHD video @ 60 Hz with 4:4:4 

chroma sampling, as well as HDMI data rates up to 18 Gbps. The HDR-EX-70-2PS provides 

HDMI transmission up to 230 feet (70 meters) for 1080p video, and up to 130 feet (40 meters) 

for 4K HDR over CAT6a/7 cable. This extender kit features visually lossless compression with no 

latency to enable HDR and 4K/60 4:4:4 video signal extension over HDBaseT. The HDR-EX-70-

2PS delivers a cost-effective solution for HDMI extension, with locally powered transmitter and 

receiver endpoints as well as surface mounting hardware for discreet installation.

The HDR-EX-70-2PS is ideal for residential applications with the latest as well as emerging 4K/

UHD and HDR sources and displays. It is compatible with all video resolutions, audio formats, 

and color space formats supported in the HDMI 2.0a specification, plus the ability to pass 

metadata for HDR content. The HDR-EX-70-2PS includes Atlona’s award-winning 10 year limited 

product warranty and customer support services, so that integrators can specify, purchase, and 

install with confidence.

IMPORTANT

: Visit http://www.atlona.com/product/AT-HDR-EX-70-2PS for the latest 

firmware updates and Installation Guide.

1 x AT-HDR-EX-70-2PS-TX

1 x AT-HDR-EX-70-2PS-RX

4 x Mounting brackets

8 x Mounting screws

2 x 5 V DC power supplies

1 x Installation Guide

Package Contents

Содержание AT-HDR-EX-70-2PS











Отзывы: