5
The AT-HDMI40SRS HDMI Extender over Single CAT5e has been tested for conformity
to safety regulations and requirements in the US, and has been certified for international
use. However, like all electronic equipment, the AT-HDMI40SRS should be used with
care.
Please read and follow the safety instructions to protect yourself from possible injury
and to minimize the risk of damage to the unit.
NOTICE
H
ARDWARE
I
NSTALLATION
1. Connect your HDMI/DVI source (such as a DVD player) to the transmitting unit.
2. Connect your HDMI/DVI display (such as a plasma TV) to the receiving unit.
3. Connect your CAT-5/5e/6 cable between the transmitting and receiving units.
4. Make sure your CAT-5/5e/6 cable is tightly connected and not loose.
5. Plug in 5V DC power cord to the power jack of the receiving unit.
6. Plug in 5V DC power cord to the power jack of the transmitting unit.
7.
‧
Follow all instructions and warnings marked on this unit.
‧
Do not attempt to service this unit yourself, except where explained in this manual.
‧
Provide proper ventilation and air circulation and do not use near water.
If a flickering or a blinking image is seen, try to adjust the rotational switch to
improve the cable skew. 0 stands for the strongest EQ while 7 stands for the
weakest. Try adjusting the EQ from 7 to 0.