Toll free: 1-877-536-3976
Local: 1-408-962-0515
6
atlona.com
Remote Control
Output Selection:
Press the number of the corresponding output (display) you wish
to select. For numbers 10 and above, select 10+ and the number
following. Example: 13 = 10+ and 3
Input Selection:
Press the number corresponding with the input you wish to select,
for numbers 10 and above select 10+ and the number following.
Example: 10 = 10+ and 0
Menu Selection:
Choose the action you wish to perform. At this time with the
AT-HDDVI1616-AM the menu items you will use are AV, Video,
Audio and ALL. Example: Input 3 with output 5. Press #3 in the
input section, press AV, and then press #5 in the output section.
The LCD display will show the input as 3AV5 on its screen.
Note:
Multiple outputs are not selectable through the IR Remote control
at this time. They are available through the front panel, TCP/IP
and RS-232 controls.
TCP/IP is another way to control your AT-HDDVI1616-AM. Connect with an ethernet cable to your
network or computer. After connecting the cable you’ll need to configure the IP on your computer.
I
P address:
192.168.0.80
Subnet mask:
255.255255.0
Default gateway:
192.168.0.1
Preferred DNS:
202.96.134.133
Alternate DNS:
202.96.128.68
Use a straight cable to connect to a router or network.
Use a crossover cable to connect directly to a computer.
TCP/IP
