Display Side
Method A: Push button
Channel select switch must be set to zero.
Push the switch button, the input source will be sequentially changed to next channel.
Method B: IR Controller
Channel select switch must be set to zero.
a. Press Power on button to enable IR control function.
b. Press hot key for input source:
F1
HDMI source #1
F2
HDMI source #2
F3
HDMI source #3
F4
HDMI source #4
d. Use Left / Right keys to select input source
Left button to switch channels in increasing order (1, 2, 3, 4, 1, ...)
Right button to switch channels in decreasing order (1, 4, 3, 2, 1, …)
Method C: Switch
This method will fix the input channel for the Receiver unit and therefore Receiverunit can NOT
be controlled by the other method.
SW1 select number Description
0
Method A & B
1
Channel 1 Only
2
Channel 2 Only
3
Channel 3 Only
4
Channel 4 Only
Source site HDMI general machine control:
Users can use the corresponding IR remote to control respective DVD player or any HDMI
compliant devices including AT-HD44M-SR itself with IR control at any display site.
10
