www.atlona.com | toll free:
1-877-536-3976
For International: 1-
408-962-0515
5
Connection of the AT-DVIDF40SR is very simple, and easy: OPTICAL, DVI, and POWER: The sequence you will
connect is in this order:
1. OPTICAL CABLES: Make sure you connect your Optical connections to both the sender, and receiver unit.
The AT-DVIDF40SR requires 2 Multi-Mode SC cables, in either 50 or 62 micron size. When connecting the Fiber
Optic cables for the first time, remove any dust caps that may be on the cable. Also wipe down the tips with a
lint-free cloth dampened in Alcohol to ensure that no particles have come in contact with tip.
2. DVI-D CABLES Now that you have connected the Optical cables, proceed with connecting the DVI-D cables
from your source to the transmitter unit, and your display cable to the sender unit. Atlona HIGHLY recommends
you use an Atlona 24 pin, Dual Link DVI cable for best performance. We conveniently offer two cables for such
an application:
ATD-14010-2 Atlona Dual Link DVI-D cable. Best for short connections, CL2-CL3 rated for in-wall use.
http://www.atlona.com/2M-6FT-ATLONA-DVI-TO-DVI-DIGITAL-VIDEO-CABLE.html
ATP-14009-2 Atlona Plenum Dual Link cable. Excellent for plenum conduits.
http://www.atlona.com/2M-6.6ft-Atlona-Plenum-DVI-Dual-Link-Male-Male-Cable.html
3. POWER ADAPTORS: Once your DVI-D cables have been connected to both sender and receiver unit, go
ahead and plug in the power adaptors that come included. Atlona Supplies two 5V 1.2a power supplies. There is
no order in which the AT-DVIDF40SR needs to be powered.
ATLONA PRODUCT REGISTRATION
Thank you for purchasing this Atlona product — we hope you’ll enjoy it.
We also hope that you’ll take a few moments to register your new purchase. Registration creates an ownership
record if your product is lost or stolen and helps ensure you’ll receive notification of performance issues and firmware
updates.
At Atlona, we respect and protect your privacy and assure you that your registration information is completely
secure. Of course, Atlona product registration is totally voluntary and failure to register will not diminish your limited war-
ranty rights.
To register go to
www.atlona.com/registration
TROUBLESHOOTING
• One of the most common installation issues that occurs is incorrect finishing of Fiber Optic Cables.
Make sure that the Fiber Optic tips are fully polished, since a rough tip can result in signal loss.
• Ensure that tips are dust-free and are folly cleaned. Dirty tips can result in a loss of signal quality,
resulting in no picture.
• 50 Micron MultiMode cable will give you optimum results. The unit is also capable with 62 micron
cable as well.
• Verify that you see both POWER, and OPTICAL link lights are on at both units. If you do not see two
lights on per unit, please follow this procedure:
• For POWER light, check to ensure that the power adaptor is fully plugged into the extender, and wall
receptacle. Verify that power is indeed on at the wall receptacle.
• For OPTICAL light, check the condition of your fiber optic cables. Are they damaged in any way?
Fiber optic cables are very sensitive to severe bends, and can fail to transmit the signal if a significant
bend snaps the internal cable. Check your DVI source, and verify it is sending a picture.
