4
Assembly and Use
Step 2:
Turn the Seat & Back (A) right side up and insert it into the Base (C).
Step 3:
Place the chair on a flat surface and put seat cushion on (D). The chair
is now ready for use.
C
D
Chair:
Step 1:
Turn the Seat & Back (A) upside down. Align the main piece of the Swivel
Pole (B) with the hole on the bottom of the seat. Insert the Bolt (E) through the
Steel Plate (F) and the hole on the bar of seat. Place a Thin Washer (G) over the
holes of the steel piece of Swivel Pole (B). Then place the Thick Washer (H) over
the Thin Washer (G). Use the Wrench (J) to tighten the Screw Nut (I) and Bolt (E)
being careful not to over tighten.
A
B
I
H
G
F
E
J