4
Assembly and Use
Step 2:
Turn the Seat & Back (A) right side up and insert it into the Base (C).
Step 3:
Place the chair on a flat surface and put the Seat and Back cushions
(D&E) on. The chair is now ready for use.
C
E
D
Chair:
A
B
J
I
H
G
F
Step 1:
Turn the Seat & Back (A) upside down. Align the main piece of the
Swivel Pole (B) with the hole on the bottom of the seat. Insert the Bolt (F)
through the Steel Plate (G) and the hole on the bar of seat. Place a Thin Washer
(H) over the holes of the steel piece of Swivel Pole (B). Then place the Thick
Washer (I) over the Thin Washer (H). Use the Wrench (K) to tighten the Screw
Nut (J) and Bolt (F) being careful not to over tighten.
K
