©2021
Atlas Sound LP
. T
he
Atlas
“Circle
A”
, Soundolier
, and
Atlas Sound are trademarks of
Atlas Sound L.P
. IED is a R
egistered
Trademark of Inno
vativ
e Electronic Designs LLC.
All rights reser
ved.
All other
Trademarks are propert
y of their respectiv
e o
wners. No endorsement is implied. Due to continual product de
velopment, specifications are subject to c
hange without notice.
ATS0
06590 R
evA 6/21
AtlasIED.com
TELEPHONE: (502) 267-7436
9701 TAYLORSVILLE ROAD
LOUISVILLE, KENTUCKY 40299 U.S.A.
5. Align the fan over the bolt (label side down) placing it flush on the mesh screen. Confirm the power cord connection of each
fan to be installed is facing each other.
6. Place the finger guard over the fan. Install bolt and nut. Tighten until finger tight.
7. Install three more nuts and bolts through the remaining goles. Tighten until finger tight.
8. Tighten all 4 bolts with a philips screwdriver.
9. Repeat steps 2 through 8 for each additional fan to be installed.
10. Connect power cord plug to fan(s) and secure so the cords will not hang into the rack after top panel is installed.
11. Re-install top panel in Texas Tough rack.
12. Plug in fan power cord to outlet.