©20
19
Atlas Sound LP
. T
he
Atlas
“Circle
A”
, Soundolier
, and
Atlas Sound are trademarks of
Atlas Sound L.P
. IED is a R
egistered
Trademark of Inno
vativ
e Electronic Designs LLC.
All rights reser
ved.
All other
Trademarks are propert
y of their respectiv
e o
wners. No endorsement is implied. Due to continual product de
velopment, specifications are subject to c
hange without notice.
ATS0
05784 R
evC 8/1
9 D
OC1
241B
AtlasIED.com
TELEPHONE: (502) 267-7436
9701 TAYLORSVILLE ROAD
LOUISVILLE, KENTUCKY 40299 U.S.A.
Introduction
The IPUSBD-8/IPUSBD-16 USB Dante
™
network audio device provides either 8x8 or 16x16 input/output channels of digital audio to/from a USB port
of a host computer to Ethernet. The Ethernet connection is auto-negotiated 100/1000MB via redundant RJ-45 ports. The USB port is compatible with
USB 3.0 and below with a maximum cable length of 3 feet. USB 2.0 or higher port is required for more than 8x8 channels simultaneously, due to
bandwidth limitations of USB 1.0.
The IPUSBD-8/IPUSBD-16 may be used in conjunction with a server or third-party computer running the GLOBALCOM
®
.IP software, and be used for
playing pre-recorded messages, or for record and playback of mic station audio.
Since the two models are physically identical, for simplicity the installations instructions are written using one model number, IPUSBD-16, with the
understanding that everything applies to both models.
Front Panel
1.
Power Indicator
-
Illuminates green when unit is has power.
Rear Panel
1.
Power Input
-
Either 12 VDC or 24VDC power in any polarity.
2.
Redundant Ethernet Connections
-
RJ-45 jacks for standard 100Base-T or 1000Base-T Ethernet connections.
3.
USB Connector
-
Typical connection is with a standard USB Type A to USB Type B cable, i.e., the same as used by USB printers.
1
2
1
3
