Owner’s Manual
TSD-TXHL
High/Low Level Converter
– 4 –
Specifications are subject to change without notice.
Rear Panel Description
TSD Input/Output connections are removable for easy system wiring. The connector has a 3.5mm
pitch between pins.
1.
Speaker Level Input
- Connect the loudspeaker line to the (G) and (+) terminals. The loudspeaker
line can be 4/8 ohm system or 25/70/100V signal levels.
2.
Output Level Control
- Adjust the signal level of the unbalanced line output. Turn clockwise to
increase the signal level and counter-clockwise to decrease it.
Note:
The output level control
knobs can be removed and replaced with supplied security covers to prevent unauthorized
adjustment.
3.
Input Gain Adjustment Switch
- Set this switch to match the signal level present on the
loudspeaker line. Use the 4 - 25V ohm position for 4/8 ohm and 25V systems, 70V or 100V for 70V
and 100V loudspeaker systems, respectively.
4.
Unbalanced Line Output
- Provides an unbalanced line output when an speaker level input signal
is present. Output is variable with adjustments made with the Output Level Control. Note the
polarity of the connector, reversing the polarity can cause sound quality issues.
5.
Cable Management Retainer Points
- Each TSD includes two cable retainer straps for securing
the included cable management retainers. Remove one of the rear panel screws, align the
panel hole with a retainer and firmly tighten the screws.
5
5
5
5
1
2
3
4
