Owner’s Manual
TSD-MIX41
4x1 Mic/Line Mixer
AtlasSound.com
– 3 –
Specifications are subject to change without notice.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
Front Panel Description
1.
Inputs 1-4 Level Controls
- Adjusts the gain of the independent input signals. Turn clockwise to
increase the signal level and counter-clockwise to decrease it.
Note:
The Input Level Control
knobs can be removed and replaced with a supplied security cover to prevent unauthorized
adjustment.
2.
Mixed Output Level Conrol
- Adjust the output level of the summed signals from the four inputs.
Turn clockwise to increase the signal level and counter-clockwise to decrease it.
Note:
The
output level control knobs can be removed and replaced with supplied security covers to prevent
unauthorized adjustment.
3.
Power LED
- Illuminates BLUE when 24VDC power is present.
4.
Output Signal LED
- Illuminates Green when the input signal strength reaches 25mV to verify a
signal path.
Note:
The LED will not illuminate if the output Level is turned Off.
5.
Output Peak LED
- Illuminates Red when the output signal reaches 3dBV below when signal
clipping will occur. Occasional flashing is normal but if this indicator is continuously On, then
reduce the input level using the input level control on the front panel.
6.
Bracket Retainer Points
- Each TSD includes two mounting brackets for securing the TSD to a
cabinet or wall. Remove screws and align the bracket with the panel hole before firmly tightening
the screws.
3
4
5
1
2
6
6
6
6
