PennEngineering • www.pemnet.com 39
Instruction Manual - RIV942
On a periodic basis check the rubber base for wear, as this is what ensures the stability of the tool. If it should need replacing, order
the spare base from PennEngineering indicating the year/serial number of the tool.
On a periodic basis check the screws and heads for wear and, if necessary, replace them as indicated.
FAULT DIAGNOSIS AND REPAIRS
REPAIRS
To ensure the operational efficiency and safety of the tool, all repair jobs shall be carried out exclusively by the local authorized dealer
or by the Technical Assistance Service of PennEngineering.
REQUESTING ASSISTANCE
For any information concerning Use, Maintenance, Installation, Repair etc., PennEngineering is at the Customer’s full disposal for all
enquiries.
When making inquiries, the customer is requested to be absolutely clear and to always refer to this Manual.
DISMANTLING INSTRUCTIONS
DISMANTLING INSTRUCTIONS
When disposing the tool you need to separate the plastic parts, which are to be disposed of in compliance with current Regulations.
As for the bulk metal part of the tool, simply split-up the steel parts from those in other metals or alloys and send to be melted down
and recycled.
The oil drained from the tool must not be thrown outdoors but handed over to an authorized oil disposal center.
