AtlasSound.com
– 8 –
Specifications are subject to change without notice.
Owner’s Manual
DSP2210 &
DSP2212
Digital Processor
and Amplifier
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
AC POWER INPUT (120VAC @ 60Hz or 240VAC @ 50Hz)
As noted in the ‘Important Notices’, DSP2210/DSP2212 utilize a UL recognized IEC AC power plug and cord (provided with the unit)
which must not be changed or defeated. Please follow these important instructions. Failure to do so will void the product warranties.
The Mains Plug is the main disconnect device for the product, and shall be located so as to be readily accessible.
NOTE: Once the AC power is switched ‘ON’ it will take approximately ‘30’ seconds to initialize and start up.
• Do not defeat the safety purpose of polarized, keyed or grounding type connectors. A polarized plug has two (or multiple) contacts
with one wider or longer than the other. A grounding type plug has two blades and a third grounding plug. The wide blade or third
prongs are provided for your safety. Do not defeat or change these. If the provided IEC power plug does not fit into your outlet,
consult an electrician or your local authority having jurisdiction to replace the outlet to insure meeting local building codes while
assuring proper connection
• Protect the power cord from being walked on or pinched particularly at the plug, receptacle outlet, and the exit point of the unit
70V SPEAKER TERMINATION
Phoenix connectors are used and are keyed or polarized to fit one way, do not force fit these connectors and follow these basic instructions;
• Do NOT force fit the connectors – they are polarized to fit in one direction
• Follow the +/- wiring polarity for all speakers
• Use only 70V speakers
• Ensure that total speaker wattage taps per channel does NOT EXCEED 80% of the rated output 25W RMS per zone.
Amp Outputs (70V)
50W RMS / ZONE
70V SPEAKERS
+
–
+
–
120VAC
Power
AC cable with IEC plug provided. All
wiring to meet NEC/ UL code
Replace AC Fuse with UL
recognized 2A @ 250VAC or
5A @ 110VAC
Fuse
(2A @ 250V AC)
or
(5A @ 150V AC)
Typical view of
UL rated Fuse
AC POWER IN