Atlas DPA-AMIX Скачать руководство пользователя страница 9

Страница: 9 / 12

Owner’s Manual

DPA-AMIX

4 Input Analog Mixer Accessory Card

AtlasSound.com

– 9 –

Specifications are subject to change without notice.

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800.876.3333 • Fax: 800.765.3435

Accessory Card Installation

Contact Atlas Sound for a list of accessory cards.

Note:

Accessory card installation must be done by

a qualified technician.

Remove the DPA amplifier from the AC mains source. Note:

In standby mode there are DC

voltages present. The the DPA amp must be removed from the AC Mains source in order to

prevent damage to the card or amplifier.

2. Remove the two screws (M3 x 8mm Pan Head Black) holding the DPA Accessory blank panel. Be

careful, do not lose the screws.

3. Remove the ribbon cable from the cover plate.

4. Connect the accessory card to the ribbon cable by carefully aligning the ribbon cable connector to

the mating PCB connector. Do not force. If aligned correctly the cable will mate easily.

5. Carefully guide the accessory card into the slot without forcing the PCB or cable.

6. After the card is inserted and the accessory panel is flush to the chassis, align the two screws

holes and secure them together by inserting two M3 x 8mm screws.

Содержание DPA-AMIX












