Atlas AE 45, Руководство по эксплуатации

Страница: 9 / 20

PennEngineering • www.pemnet.com
9
Changing the length of the insert to clamp, the position of the head (B) compared to the threaded tie rod
(A) should be adjusted. Disconnect the riveting tool from the compressed-air supply.
Screw an insert of the desired length on the threaded tie rod manually until the insert head touches the riv-
eting tool head (B). The head is adjusted correctly if the threaded tie rod comes out of the insert screwed
on it of about 2 mm. Otherwise unblock the ring nut (C) with a 22-mm standard spanner then screw or
unscrew the head (B) up to the right position, and block the ring nut (C).
11
12 13
ADJUSTMENT OF THE COUPLE TIE ROD/HEAD